Sony Ericsson K510i disassembly

If you require a new screen, phone cover and screwdrivers, they can be purchased here: http://www.formymobile.co.uk/proddetail.php?prod=k510ilcd

Tools required: Torx 6 screwdriver

• Remove back cover and battery. Now unclip the front cover. It should be lifted away from the bottom of the phone, as pictured below

• You'll now have access to four torx 6 screws. Remove these

• Now remove the metal plate which surrounds the screen

• Lift the keypad module from left to right. It is held on by a clip at it's top right fixing point (circled below). Just lift it until it unclips

• You now have access to the LCD. Push they grey part in the direction of the arrow, indicated below. Now lift the LCD from the top and pull the ribbon away from the socket. Replace the old LCD with the new one. Reverse the whole procedure for reassembly

If you have any questions about Sony Ericsson K510i disassembly, email rob.lee@formymobile.co.uk. The official service manual for this phone may also help you with further Sony Ericsson K510i disassembly. Click here for details

Source : www.formymobile.co.uk